DAIYAC COLLET CHUCK & GUIDE BUSH SPINDLEs for Micro-machining

Posted on Posted in DAIYAC

DFZ Trading.co.th.

นำเข้า อุปกรณ์,เครื่องมือ,ชิ้นส่วนต่างๆ ของเครื่องจักร, เครื่องมือวัด และเครื่องมือทางอุตสาหกรรมอื่นๆ บริษัทเป็นตัวแทนจำหน่ายสินค้าแบรนด์ต่างๆทั้ง จาก ญี่ปุ่น, ยุโรป, เกาหลี, ไต้หวัน

Name :

DAIYAC COLLET CHUCK & GUIDE BUSH SPINDLEs for Micro-machining

Category :

เครื่องจักร, อุปกรณ์เกี่ยวกับเครื่องจักร, เครื่องมือกล

Sub - Category :

DAIYAC Collet Chuck & GUIDE BUSH

Brand :

DAIYAC COLLET CHUCK & GUIDE BUSH

Model :

-

Product Type :

เครื่องมือ, เครื่องจักรและอุปกรณ์

Short Description :

DAIYAC COLLET CHUCK & GUIDE BUSH SPINDLEs for Micro-machining High-speed, High-precision Spindle LA-600 for Micro-Machining

LA-600

 

High-speed, High-precision Spindle LA-600 for Micro-Machining

The high-speed, high-precision spindle LA-600 is a high-speed spindle unit fine-tuned to meet micro-machining needs. Rotating at the high speed of 60,000 revolutions per minute, the spindle demonstrates outstanding cutting performance and finishing accuracy in end-mill or drill machining.

LA-600
Maximum revolution speed : 60,000min-1 (rpm) Spindle accuracy : 1μm or better
A combination of air cooling and ceramic bearing realizes the speeds of 10,000 to 60,000min-1 (rpm) . The spindle accuracy is better than 1μm. Even the dynamic run-out accuracy is within the control.

Compact size and high-rigidity stainless steel body

The spindle body is as short as 149mm. The motor and spindle exteriors are all stainless steel (SUS420J2). The spindle clamp, which is hardened and grinder-finished, are of high-rigidity specifications.
Compact size and high-rigidity stainless steel body

Photograph of processing by BISSIAH MD20

Photograph of processing by BISSIAH MD20

High power of max.370W output and flat torque

A flat torque characteristic is displayed over the whole speed range of 10,000 to 60,000 min-1 (rpm). The brushless motor is a highly reliable and durable type. The maximum output is as high as 370W.
Output and Torque Curves
Output and Torque Curves

Principal Uses

* Use as tooling for end-mill machining or grinding with an end-mill or grinding wheel attached to the spindle end on a comb-type lathe.
* Use for small-bore hole finishing (bore polishing) in a lathe operation.
* Use for deburring, drilling (by a drill) or slitting by a metal saw with this spindle attached to a dedicated machine.
* Use for deburring or polishing with this spindle attached to the end of a robot arm.

 

LA-600A

High-speed, High-precision Attachment Spindle for Micro-machining

LA-600A, attached to your existing NC milling machine or machining center, will realize high-speed machining. At a high speed of 60,000min-1(rpm) , this spindle displays superior cutting performance and finishing in small-diameter end-mill cutting or drilling.
LA-600A LA-600A

Maximum revolution speed : 60,000min-1 (rpm)

Spindle accuracy : 1μm or better

High power of max. 370W output and flat torque characteristic

A combination of brushless motor and ceramic bearing

The spindle is driven by a direct-drive brushless motor. Without any speed increase with gears or the like, this spindle causes little heating or vibration, which contributes to producing finely finished surface.

esponsive to various attaching tapers

The spindle can be fitted to various tapers of BT, HSK and other shanks.

Product Specifications

Revolution speed 10,000 to 60,000min-1 (rpm)
Maximum output 370w
Spindle accuracy 1μm or better
Cooling air supply 0.2 to 0.5MPa
Clean dry air
4mm tube dia
Collet chuck
(option)
Daiya's CCER11-SR used (AA class or above recommended)
Holding diameter : 0.5 to 6.0 mm (Chuck nut wrench included)

●BT50-type Diameter

BT50-type Diameter

Installation photograph of machining

Installation photograph of machining

Data on grooving in hardened die steel

Comparison of machining data between the conventional general-purpose machining center and the LA-600A attached to a general-purpose machining center.
Material SKD11 (HRc61)
Tool Carbide solid molded end mill (non-coated)
Groove length 143mm
  LA-600 General-purpose machining center
Revolution speed 
N [min-1]
50,000 5,000
Feed rate 
F [mm/min]
250 15
Depth of cut (Z direction) [mm/min] 0.1 0.05
Relative roughness of surface ○(Visual) ○(Visual)
Tool life x
Grooving time [min] 3min 40sec 40min or more
Section ditch

 

Control Unit

This is a compact-size, highly-functional control unit for the LA series.

Highly-functional

highly-functional control unit
Revolution speed display, alarm display, external control function.

Protective functions

Cooling air supply monitor, overload monitor, cord break monitor, revolution monitor

External control input/output

(Remove the center cover of the front panel, and there are input/output terminals.) 
Power ON/OFF, Forward/Reverse revolution, RPM UP/DOWN, RPM/Current monitor, Alarm output

Names of Parts

1 Main power switch
2 Rotation switch
3 Start switch
4 Speed Down switch
5 Speed Up switch
6 Revolution speed display
7 Air Out
8 Air In
9 External input terminal
10 Serial connector (RS232C)
11 Motor connector
12 Power main switch
13 AC IN power socket
Names of Parts

Product Specifications

Power supply 100VAC, 50/60Hz
220VAC, 50/60Hz (option) 
240VAC, 50/60Hz (option)
Air supply 0.2 to 0.5MPa
Clean dry air 
(Air supply being monitored by controller)
4 mm diam. x 5 m tube included
Rated power 123w
Mass 2.4kg
Dimensions 200(W) x 220(D) x 42(H) mm

 

Custom-made

 

Daiya Seiki is designing and manufacturing a variety of high-precision and high-speed spindles for use in production equipment and dedicated machinery or as OEM products.
High-speed spindles for dedicated machinery
High-speed spindles for dedicated machinery
Spindles for pneumatic static-pressure bearings (air bearings)
Spindles for pneumatic static-pressure bearings (air bearings)

ขอใบเสนอราคา

Company name :

บริษัท ดีเอฟแซตเทรดดิ้ง จำกัด
DFZ Trading Co., Ltd.

Business Information

Industry group :

รถยนต์และชิ้นส่วนที่เกี่ยวกับรถยนต์

Business type :

Service provider
Importer
Distributor

Contact Information

Address 1 :

68/16 หมู่ 19 ต.คลองหนึ่ง อ.คลองหลวง จ.ปทุมธานี 12120

Country :

68/16 หมู่ 19 ต.คลองหนึ่ง อ.คลองหลวง จ.ปทุมธานี 12120

Tel :

+66(0) 2072 9926

Fax :

+66(0) 2072 9926

E-mail :

est@dfztrading.co.th (OFFICE)
sales@dfztrading.co.th (SALES)

Other information

Capital Investment :

5,000,001 - 10,000,000

Annual revenue :

25,000,001 - 50,000,000